The UV Room sterilizer FY-30DC has two 30 watt UV lamps that emit a high intensity ultraviolet light that hits every surface in the room and kills any micro organisms or pathogen including MRSA, hand foot mouth disease, colds and flu, pneumonia, molds, e.coli, salmonella and similar type bacteria. The light penetrates and destroys the actual DNA of micro organisms. There is no known micro organism that is immune to UV-C energy.
This product is made of carbon steel, with its double-tube structures, but also can be used independently. The technical parameters are:
1. Tube Power : ≥30W×2
2. Number of tubes:2
3. Applicable static area : ≥30m2
4. Voltage:110V/ 220V±10%,Frequency:50Hz±10%
5. Input power:180VA
6. UV wavelength:253.7nm
8. It is movable and foldable, the tube could be concealed inside, and adjusted to various angles:90°,135°,180°.
9. It is equipped with a timer and can be set in a range of 0-120 minuntes.
The Ultraviolet sterilizing trolley is mainly used in the medical and hygienic units as well as the industrial section of food and medicines for the air sterilization.
Method of use
This product can be used alone with single light tube. The angle of the lamp arm can also be adjusted. Please close the safety door when it is not in use in order to avoid the damage of the light tube and also maintenance of the cleaning of the tubes. The timer can control the sterilizing time within 120 minutes. The circuit will be automatically closed when time is up. Every part of the unit should be tested beforehand in order to check whether it has the problem of leakage of electricity. The three-pin plug must have a land wire in order to avoid the electric shock. Please cut the electric circuit after the unit is used and then withdraw the plug from the socket.
1. The voltage range should be less than 10% or it will affect the rated life.
2. Double tube structures, the arm of lamp can be adjustable according to the angle.
3. The timer can set the sterilization time,the power will be cut off automatically. Follow the direction instructions.
4. Ensure the UV lamp surfaces are kept clean or it will affect the performance and efficiency.
5. Also keep clean so there is no electricity risk.
6. After use turn off the plug of power at power point.
7. When storing the unit must be kept in a dry and clean room.
8. UV illumination less than 70% or more than 2000 hours working the lamp should be changed.
The prices are set out below and are FOB Shanghai. Please get in contact to provide an accurate quote to your country.
We are here to help!
1-19 sets – USD59 per set
20-49 sets – USD56 per set
50 sets – USD48 per set
If a larger quantity is required please feel free to get in contact to discuss.
Can facilitate express by air for time critical emergencies also for large quantities.